WGK_img_01psd.png
External weather louvre, variant WGK

External weather louvre made of aluminium sections, anodised

WGK_img_02psd.png
Regular blades

Regular blades

WGK_img_03psd.png
Bottom blade

Bottom blade

WGK_img_01psd.png
WGK_img_02psd.png
WGK_img_03psd.png

WGK

With small blade pitch

External weather louvres to protect ventilation and air conditioning systems against the direct ingress of rain, leaves and birds into fresh air and exhaust air openings.

  • Maximum width of 1997 mm, maximum height of 1997 mm
  • Low differential pressure due to aerofoil blades
  • Low air-regenerated noise
  • All aerodynamic data is measured in aerodynamics and acoustics laboratories
  • Available in standard sizes and many intermediate sizes
  • Simple and quick installation due to perimeter border

 


Optional equipment and accessories

  • Installation subframe
  • Insect screen
  • Powder-coated or with anodised finish

 


 

General information

Application

  • External weather louvres with small blade pitch, for the fresh air and exhaust air openings of ventilation and air conditioning systems
  • Protection against the direct ingress of rain as well as against leaves and birds
  • Recommended face velocity for outdoor air openings 2 – 2.5 m/s max.



Special features

  • Low differential pressure and low air-regenerated noise due to aerofoil blades
  • Simple and quick installation due to perimeter border
  • Silicone free



Nominal sizes

  • B: 97, 147, 197, 297, 397, 497, 597, 797, 997, 1197, 1397, 1597, 1797, 1997 mm (intermediate sizes 98 – 1996 mm in increments of 1 mm)
  • H: 97,147, 197, 247, 297, 347, 397, 447, 497, 597, 797, 997, 1197, 1397, 1597, 1797, 1997 mm (intermediate sizes 122 – 1972 mm in increments of 25 mm)



Construction

Cover grille

  • Crimped wire mesh
  • 1: With insect screen, galvanised steel
  • 3: With insect screen, stainless steel

 Front border

  • With holes
  • U: without holes


Parts and characteristics

  • Front border
  • Regular blades and bottom blade
  • Crimped wire mesh
  • Insect screen (optional)
  • Visible stabilising mullion from B = 597 mm, two mullions from B = 1198 mm, three mullions from B = 1797 mm



Accessories

  • Installation subframes for the fast and simple installation of external weather louvres



Construction features

  • Border, material thickness 1.3 mm
  • Blades, material thickness 1.35 mm
  • Crimped wire mesh at the rear, mesh aperture 6 × 6 × 0.63 mm
  • Optional insect screen at the rear, mesh aperture 1.25 × 1.25 × 0.4 mm
  • Border fixing holes


Materials and surfaces

  • Border, blades and stabilising mullions made of extruded aluminium sections, material no. EN AW-6060 T66, with anodised finish, colour to EURAS standard E6-C-0, natural colour
  • Crimped wire mesh made of galvanised steel
  • P1: powder-coated, RAL CLASSIC colour
  • PS: powder-coated, NCS or DB colour


Maintenance

  • Maintenance-free, as construction and materials are not subject to wear

Description

Variants


Parts and characteristics

  • Front border
  • Regular blades and bottom blade
  • Crimped wire mesh
  • Insect screen (optional)
  • Visible stabilising mullion from B = 597 mm, two mullions from B = 1198 mm, three mullions from B = 1797 mm


Accessories

  • Installation subframes for the fast and simple installation of external weather louvres


Nominal sizes

  • B: 97, 147, 197, 297, 397, 497, 597, 797, 997, 1197, 1397, 1597, 1797, 1997 mm (intermediate sizes 98 – 1996 mm in increments of 1 mm)
  • H: 97,147, 197, 247, 297, 347, 397, 447, 497, 597, 797, 997, 1197, 1397, 1597, 1797, 1997 mm (intermediate sizes 122 – 1972 mm in increments of 25 mm)



Technical information

Function, Technical data, Quick sizing, Specification text, Order code, Related products

  • Function
  • TECHNICAL DATA
  • QUICK SIZING
  • SPECIFICATION TEXT
  • ORDER CODE
Schematic illustration of WGK-AL WGK_gc_02ai.png

① Front border

② Regular blades

③ Bottom blade

④ Fixing holes

⑤ Crimped wire mesh; additional insect screen as an option

⑥ Reinforcing strut from H = 597

⑦ Stabilising mullion from B = 597

External weather louvres are externally mounted air transfer devices for the fresh air and exhaust air of air conditioning systems. They are installed in external walls and façades. Their narrowly arranged blades give good protection against the direct ingress of rain as well as against leaves and birds. Under certain unfavourable conditions, such as heavy rain, and depending on the airflow velocity, slight quantities of water could enter with the air. This is why the airflow velocity in fresh air openings should not exceed 2 – 2.5 m/s.


 

Nominal sizes97 × 97 – 1997 × 997 mm/1197 × 1997 mm


 


Quick sizing tables in the Easy Product Finder provide a good overview of the

  • Possible volume flow rates for different airflow velocities
  • Corresponding pressure losses
  • Sound power level
  • Free areas

Precise values based on project-specific data can be determined with our Easy Product Finder design program.

You will find the Easy Product Finder on our website:

www.trox.de/mytrox/auslegungsprogramm-easy-poduct-finder-182e16348fac3d33


Rectangular external weather louvre as a protection for air conditioning systems against the direct ingress of rain, leaves and birds into fresh air and exhaust air openings. Ready-to-install component which consists of a border, aerofoil rain defence blades, and a bird mesh at the rear.

Special features

  • Low differential pressure and low air-regenerated noise due to aerofoil blades
  • Simple and quick installation due to perimeter border
  • Silicone free


Materials and surfaces

  • Border, blades and stabilising mullions made of extruded aluminium sections, material no. EN AW-6060 T66, with anodised finish, colour to EURAS standard E6-C-0, natural colour
  • Crimped wire mesh made of galvanised steel
  • P1: powder-coated, RAL CLASSIC colour
  • PS: powder-coated, NCS or DB colour



Construction

Cover grille

  • Crimped wire mesh
  • 1: With insect screen, galvanised steel
  • 3: With insect screen, stainless steel

 

Front border

  • With holes
  • U: without holes


Technical data

  • Nominal sizes: 97 × 97 – 1997 × 997 mm / 1197 × 1997 mm


Sizing data

qᵥ [m³/h]
Δpt [Pa]
Air-regenerated noise
LWA [dB(A)] 

WGKAL3/1197 × 797/ER/P1 - RAL …
|||||||
1234567
1 Type
WGK External weather louvre with small blade pitch
 
2 Material
AL Anodised aluminium
 
3 Construction
No entry required: crimped wire mesh, galvanised steel
1 Insect screen, galvanised steel
3 Insect screen, stainless steel
 
4 Front frame
No entry required: with holes
U Without holes
 
5 Nominal size [mm]
B × H
 
6 Installation subframe
No entry required: none
ER With (not with unperforated front border)
 
7 Surface
No entry required: with anodised finish (S3), E6-C-0 (natural colour), colour to EURAS standard
P1 powder-coated, specify RAL CLASSIC colour
S2 with anodised finish, specify EURAS standard colour (31 – 35)
 
Gloss level
RAL 9010 50 %
RAL 9006 30 %
All other RAL colours 70 %
 
Order example: WGK–AL–1/997×1622/P1–RAL 9006
MaterialAluminium
ConstructionInsect screen, galvanised steel
Nominal size997 × 1622 mm
Installation subframeNone
User interfacePowder-coated, RAL 9006, white aluminium

Dimensions and weight, Product details, Installation details

  • DIMENSIONS AND WEIGHT
  • PRODUCT DETAILS
  • INSTALLATION DETAILS
WGK WGK


WGK, width 97 – 997 mm, weights [kg]

H [mm]

B [mm]

97

147

197

297

397

497

597

697

797

897

997

9711111111112
14711111111222
19711111222223
24711112222333
29711122233334
34711122333444
39711222334445
44711223344455
49711223344556
59712233455667
79712344567889
9971234567891011
1197234568910111214
13972356791012131416
159724578101213151618
179724689111315171820
1997246810121416182022


WGK, width 1097 – 1997 mm, weights [kg]

H [mm]

B [mm]

1097

1197

1297

1397

1497

1597

1697

1797

1897

1997

972222333333
1472233333444
1973333444445
2473444455556
2974455566667
3475556667778
3975666778889
44766778899910
4976778899101011
5978899101111121213
79710111212131415161617
99712131415161718192021
119715161718202122
13971719202123
1597202123
179722
1997
Border fixing holes, WGK WGK_gc_04ai.png

WGK, standard sizes, width B, no. of flange holes n

B [mm] Number of holes n T₁ [mm] T₂ [mm]

97

1

B/2

147

1

B/2

197

1

B/2

297 2 262 17.5
397 2 362 17.5
497 3 231 17.5
597 3 281 17.5
797 3 381 17.5
997 4 321 17.5
1197 4 387 17.5
1397 5 341 17.5
1597 5 391 17.5
1797 6 352 17.5
1997 6 392 17.5


WGK, standard sizes, height H, no. of flange holes n

H [mm] Number of holes n T₃ [mm] T₄ [mm]
97
147
197
297
397
497
597 3 281 17.5
797 3 381 17.5
997 4 321 17.5
1197 4 387 17.5
1397 5 341 17.5
1597 5 391 17.5
1797 6 352 17.5
1997 6 392 17.5


WGK, intermediate sizes, width B, no. of flange holes n

B [mm] Number of holes n T₁ [mm] T₂ [mm]

97 – 296

1

B/2

298 – 396

2

B - 35

17.5

398 – 796

3

(B - 35)/2

17.5

798 – 1396

4

(B - 35)/3

17.5

1398 – 1796

5

(B - 35)/4

17.5

1798 – 1996

6

(B - 35)/5

17.5


WGK, intermediate sizes, height H, no. of flange holes n

H [mm] Number of holes n T₃ [mm] T₄ [mm]

122 – 572

0

622 – 772

3

(H - 35)/2

17.5

822 – 1372

4

(H - 35)/3

17.5

1422 – 1772

5

(H - 35)/4

17.5

1822 – 1972

6

(H - 35)/5

17.5

,

Wall installation without installation subframe WGK_gc_01ai.png

Installation and commissioning

  • Installation with or without installation subframe


    Downloads

    product information

    production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

    Share page

    Recommend this page

    Recommend this page by sending a link by mail.

    Fields marked with an (*) are required fields.

    Share page

    Thank you for your recommendation!

    Your recommendation has been sent and should arrive shortly.

    Contact

    We are here for you

    Please specify your message and type of request
    Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

    Fields marked with an (*) are required fields.

    Contact

    Thank you for your message!

    Your message is send and will be processed shortly.
    Our department for Service-Requests will contact you asap.
    For general question regarding products or services you can also call:
    Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

    Contact

    We are here for you

    Please specify your message and type of request
    Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265

    Attachment (max. 10MB)

    Fields marked with an (*) are required fields.

    Contact

    Thank you for your message!

    Your message is send and will be processed shortly.
    Our department for Service-Requests will contact you asap.
    For general question regarding products or services you can also call:
    Tel.: +49 (0)2845 / 202-0 | Fax: +49 (0)2845/202-265